Revit Protocols
Loading IPS.
All IPS are recognised as CodeBook components and can be synchronised back into the CodeBook database. The panels would be pre-loaded into the project as illustrated below;
The correct IPS type is loaded into place. There are two family types; Basin which is 125mm deep, and WC which is 300mm deep. WC panels are placed where a cistern is required.
When loading into model, the correct type needs to be inserted. The type is dictated by the modular width; 600W, 900W etc...
Upon insertion, the width of the IPS can be reduced to cater for its specific location. This is done my dragging the arrow inwards. Please note; the maximum length the width can be reduce by is currently 30mm, the arrows cannot be pulled outwards to stretch the IPS. If a larger width is required, a larger type length needs to be inserted.
The default height of the IPS is 2400mm, this can be adjusted if required again by using the blue height arrows.
Farhad Hosany
